How to Remove The Thermal Paste from CPU Pins? | Guide 2022

How to Remove The Thermal Paste from CPU Pins

How to remove the thermal paste from CPU pins? Many of you have the same question in mind. Read this article in full to know the answer.

Thermal paste is very much important among the PC components. Without it, the CPU might face overheating issues, and also it affects the lifespan of the CPU. Here you will know the ways to remove the thermal paste from CPU pins. So keep reading.

Thermal paste is a substance that is applied between the heat sink and the cooling assembly of an electronic component. It is used to fill in any air gaps, which would otherwise create thermal resistance.

Thermal paste also helps conduct heat more efficiently from one device to another while it’s being transferred away from the processor or other equipment. This will help ensure that your computer runs at optimal performance for longer periods without overheating or shutting down unexpectedly.

There are many different types of thermal paste available on the market today, but not all perform equally. There is no absolute standard for how it should perform, but there are general guidelines that manufacturers follow. This means you should research different options before deciding which thermal paste to use in your computer or electronic device.

The most common type of thermal paste is silver-based, but there are also aluminum and zinc stearate pastes available on the market today as well.

It’s essential to look at the manufacturers’ specifications for each product before deciding which one would be best suited for your needs. Thermal conductivity requirements vary by application; you should also be aware that some manufacturers will provide specifications for operating temperatures and other factors as well.

How to Remove The Thermal Paste from CPU Pins

When it comes to selecting the best thermal paste, you should look at compatibility first. Not all equipment is compatible with certain types of thermal paste; this means your computer or electronic device might not function properly after installation if they do not use the same type of paste. The thermal conductivity of the paste should also be considered, as well as its ease of application and other factors that you find to be important based on your needs.

How Often Should You Clean Thermal Paste off CPU and Reapply?

To see the benefits of a quality thermal paste, you will need to make sure it is applied correctly. Proper application requires that the CPU and heatsink are cleaned thoroughly before applying the thermal paste. It also means removing any excess residue from previous applications which can be done by wiping down both surfaces with a clean cloth or paper towel moistened with rubbing alcohol.

Then, when you’re ready to apply your thermal compound again, use an applicator card (like this one) instead of your fingers so you can get uniform pressure without leaving any air bubbles behind on either surface. The time in between re-applications varies based on how often you overclock your system and what type of cooling solution you have installed. While the manufacturers of some pastes suggest re-application every year, others say up to three years.

How To Remove The Thermal Paste From CPU Pins?

We all know that when we upgrade our CPU, we need to remove the old thermal paste and put it on a new paste. There are many ways you can do this, but one of the most common is using a credit card. 

I used my Visa for this process and it was very simple and quick! I just heated my CPU with a blow dryer until the thermal paste started to melt into liquid form. Then I took my card and peeled off as much of the old thermal paste as possible. And finally, I applied some new thermal compound (Thermal Grizzly Kryonaut), which was easy because it came in an applicator tube.

I let it sit for about 30 minutes until the CPU was cool enough to turn on. Then I booted up my computer and ran some benchmarks (no noticeable difference).

Factors To Consider When Buying A Thermal Paste

When buying a thermal paste, there are many factors you should take into consideration. The most important thing to do when considering which paste is best for your system is to consult the manufacturer’s recommendations. Once that has been established, we can move on to other points of consideration:

Every person who owns and operates a computer knows how frustrating it can be when the machine starts getting slow and unresponsive. This is because computers generate heat as they operate and this heats the components inside your system case such as graphics cards or processors.

When this happens, it becomes difficult for these parts to function at their optimum level; this, in turn, will cause your operating system (OS) performance (how fast apps open) and overall speed of your system to slow down.

This is where thermal paste comes in handy! By replacing the stock cooling compound which came with your CPU or GPU, you can improve heat transfer between the processor and cooler allowing for better performance at lower temperatures.

Picking out a good thermal paste can be an overwhelming task but do not worry because we have compiled some of the most important things to look for when purchasing it:

Thermal Conductivity

The thermal conductivity of a paste is measured in W/m-ºC and its job is to measure how efficient it will be at lowering your system’s temperatures. Better quality pastes have higher numbers while low-quality ones tend to fall below one (or even below half of that). If your paste’s thermal conductivity is too low, the chances are it will not be able to transfer heat away from your components.


The volume or amount of paste in each tube also plays a role when considering which one you should buy. Some brands come with very small amounts while others provide quite large ones. When considering which paste to purchase, you need to make sure that it will be enough for your CPU/GPU and provide room for error too (meaning don’t go overboard).

Application Method

The application method is important because there are two types of pastes available today; one requires “pasting” or spreading while the other is a “pen”. The pen-type thermal paste is the easiest to use as it works by simply touching your CPU/GPU with its tip. However, this type of paste does not have a very high viscosity so you will need several applications before finishing up.

How Long Does Unused Thermal Paste Last? 

The question of how long thermal paste lasts before it becomes useless is one that many people are wondering about. Well, the answer to that question is simple but also complicated at the same time. The short answer to this question is “it depends”. 

If you have a CPU cooler with a built-in heat sink and fan, then there’s no need for thermal paste on your core components. But if you have an older or custom PC setup, then yes – the thermal paste will be required to have optimal cooling efficiency. If you’re unsure whether or not your CPU needs thermal paste, just consult the CPU installation guide for your specific processor.

Why is the simple answer to the question, “How long does thermal paste last before it becomes useless,” complicated? Well, because several variables factor in when determining how long unused thermal paste will last.

Here’s a list of variables (in order) and their individual effects on your unused thermal paste:

1. Temperature – The ideal temperature for thermal paste is 70 degrees Celsius, or 158 Fahrenheit. If you have a lot of heat in your computer room, then you’re going to have an overheated CPU and need to replace your thermal paste more often than someone with a cooler atmosphere.

2. Humidity – The amount of humidity inside the air will also affect how long your thermal paste will last. Just like a hot room, the hotter and/or more humid it gets in your house or building, the faster you should replace your thermal paste.

3. Contact – The amount of contact between the CPU and CPU cooler determines how much heat is being transferred from one to another. A cooler-to-CPU contact will transfer less heat than a cooler-to-CPU contact that is not flat.

4. Compressed – How compressed, or how much pressure is applied to the thermal paste when the CPU is installed in the socket will affect performance. A cooler with little pressure won’t perform as well as one with high pressure.

5. Used vs. New – If you have a tube of dead thermal paste, then it won’t be as useful as a fresh tube. The used thermal paste cannot be reused at all.

So how long does unused thermal paste last? Well, considering that we haven’t tested every single type on the market and we haven’t tested them at various temperatures, pressures, contact, and humidity levels – your guess is as good as mine.

Though it’s hard to tell how long thermal paste will last before it expires, there are some things you can do to get the most out of your tube or jar of thermal paste. First, keep your CPU room temperature at around 70 degrees Fahrenheit or less – you can use a thermometer to monitor the heat inside your room.

Next, keep it out of direct sunlight and in an area where it won’t be disturbed very often. Make sure that when you install the CPU cooler, you don’t press down too hard or not at all. If you do either one of those two things then you’re going to have a bad time and need to replace the thermal paste sooner rather than later.

How to Remove The Thermal Paste from CPU Pins


This is an easy process that can be done in ten minutes. To remove the thermal paste from CPU pins, you will need a few basic supplies and tools (listed above). You might also want to make sure your work area is clean and free of any debris before starting this project. Once everything is set up, follow the steps mentioned above in this article.

After completing these simple steps, it’s time to put all of your equipment back where it belongs. Hope you found our article on “How to Remove The Thermal Paste from CPU Pins” useful. If there are any questions, ask your computer technician, or feel free to leave them in the comments section below. We would be happy to help.

Thanks for reading!

Matt Booth has been playing video games professionally for over a decade. He started out as a competitive player in the Halo series, and transitioned to professional gaming with the release of Call of Duty: Modern Warfare. Since then, he has competed in countless tournaments across the globe, winning hundreds of thousands of dollars in prize money.

Leave a Comment